Add to your canopy with the Miro-4 T5 High Output Retrofit Kit from LET Lighting. Retrofit kits give you the flexibility to add T5 lamps virtually to any tank, while keeping a low overall cost. T5 lighting can either be the main light source or supplemental light to another light source like LED or metal halide. The overall spread and coverage of T5 HO lighting makes them really hard to beat.
- Quiet, cool operation
- Add to existing lighting, or as main light source
- Flexible to many different applications
- Easy to follow instructions
We really like the control and flexibility that T5 retrofit kits give. If you do not want to invest into a fixture, or you have a canopy that will not allow a properly sized fixture inside of it, retrofit kits are the way to go. They can be installed almost anywhere, and the color coded wiring harness makes wiring a breeze. LET includes high quality individual parabolic reflectors made from 96% German reflective aluminum allowing light to be evenly spread across your tank, virtually eliminating hot spots and shadows.
What's in the Box
- 1x T5 Ballast
- 1x Wire Harness
- 1x Grounded Powercord
- 4x T5 Moisture-Proof End Caps
- 4x T5 Mounts/Stand-offs for End Caps
- 2x Miro-4 T5 Reflectors for lamps
- 2x Lamp Clips
- Mounting Hardware for Lamp Clips and Stand-off
- Installation Instructions
| SKU | Reflectors | Ballast | Power Cord | Lamp Clips | End Caps | Stand Offs | Wire harness |
| 207779 | 2x 2 Feet | 2 x 24 Watt | 6 Feet | 4 | 4 | 4 | Included |
| 207783 | 2x 3 Feet | 2 x 39 Watt | 6 Feet | 4 | 4 | 4 | Included |
| 207787 | 2x 4 Feet | 2 x 54 Watt | 6 Feet | 4 | 4 | 4 | Included |
| 209495 | 2x 5 Feet | 2 x 80 Watt | 6 Feet | 4 | 4 | 4 | Included |
Bulbs not included - We recommend ATI or Giesemann T5 bulbs.
| SKU | T5 HO Miro-4 Retrofit Kit - LET Lighting |
|---|---|
| Aquarium Type | Saltwater |
Product Questions
It is just a hair under 36" so it should be able to fit easily.
Take care
Each set of two bulbs or ballast would need to have its own power supply.
Take care
Often times when the fixture is flashing like that is because the wires are not fully inserted or do not have a good connection. I would check those and then give us a call if the issue persists!
Take care
Thank you for reaching out with your question
The fixtures are approximately 2 inches wide from front to back per reflector.
If you have any other questions, let us know
Thank you for reaching out with your question.
The reflector width is about 2 inches. The kit is really. We used it on our BRS 160 and are really happy with it.
Please let us know if you have any other questions.
With the LET Retrofit kits, you can decide where you want the bulbs. They do not need to be side by side since there is enough wire to create a 2-foot gap between the two bulbs if you wish to put a LED or MH light in the center creating a hybrid lighting system.
Thanks for the question and have a great day!
Login and Registration Form