Loading...
Bulk Reef Supply

DIY Aquarium Screen Top Kits for Rimless Tanks - 1/4" Netting

4.3
Grouped product items
2 Ft DIY 1/4 In Screen Top Netting Kit

SKU: 220130

In stock

$36.51 $43.99

- +
3 Ft DIY 1/4 In Screen Top Netting Kit

SKU: 220135

In stock

$39.83 $47.99

- +
4 Ft DIY 1/4 In Screen Top Netting Kit - Rimless Tanks

SKU: 220140

In stock

$45.64 $54.99

- +
5 Ft DIY 1/4" Screen Top Netting Kit - Rimless Tanks

SKU: 220145

In stock

$53.11 $63.99

- +

Why does BRS recommend this?

We make a screen top for every tank we set-up at BRS! Clear netting lets about 99% of light through unlike glass or acrylic all the while keeping your beloved fish and critters in.

Build a screen top for your aquarium on your own with one of our DIY Kits. If you have a rimless tank just simply select the length of your tank for the properly sized screen netting kit.

Available for the following tank sizes:

  • 2 Foot Rimless
  • 3 Foot Rimless
  • 4 Foot Rimless
  • 5 Foot Rimless
  • 6 Foot Rimless

 

Rimless tanks are becoming more and more common and we all know why they simply just look better. They do require a full-sized net top to span the full length of the aquarium, keeping your fish in the tank. Many people will make their own plastic brackets, magnets, or come up with their own DIY way to suspend the top just inside of the glass of the tank for the best overall look. If you'd rather not DIY your own brackets, we suggest using the Neat Aquatics Rimless Screen Top Frame Corners in place of the corners included in this kit. 

 

Rimless Kits:

Rimless kits come with full-length frame sections to span the total length of the tank to create a single screen top. Only 4 corners are needed to complete a rimless screen net top kit.

 

1/4" DIY Aquarium Screen Top Netting Kits Quick Compare

Aquarium Size Frame Sections Screen Corners Netting Roll Spline Roller Spline
Width
Depth
2 Foot 2x 2 Foot 2x 2 Foot 4 6.5' x 2.5' 1/4” x 25'
3 Foot 2x 3 Foot 2x 2 Foot 4 6.5' x 2.5' 1/4” x 25'
4 Foot Rimless
2x 4 Foot 2x 3 Foot 4 6.5' x 6.5' 1/4” x 25'
4 Foot Rimmed 2x 4 Foot 2x 4 Foot 8 6.5' x 6.5' 1/4” x 25'
5 Foot Rimless
2x 5 Foot 2x 4 Foot 4 6.5' x 6.5' 1/4” x 25'
5 Foot Rimmed 4x 3 Foot 4x 3 Foot 8 6.5' x 6.5' 1/4” x 25'
6 Foot Rimless
2x 6 Foot 2x 4 Foot 4 6.5' x 6.5' 1/4” x 25'
6 Foot Rimmed 3x 4 Foot 3x 4 Foot 12 6.5' x 6.5' 1/4” x 25'

 

Assembly Required:

Screen frame can easily be cut with a typical hacksaw or saw with a metal blade.

More Information
SKU DIY Aquarium Screen Top Netting Kits Rimless
Aquarium Type Saltwater, Freshwater
Write Your Own Review
You're reviewing:DIY Aquarium Screen Top Kits for Rimless Tanks - 1/4" Netting
Your Rating
Only registered users can write reviews. Please or

Product Questions

Hi, I got 5ft long and 2.5ft long tank (60*30) rimless tank.
which kit should i choose to buy? Thank You
Question by: Loke on Sep 13, 2020, 8:13 PM
You would want the 6 foot rimless and cut it down to size.
Answer by: Matt Lucero (BRS Staff) on Nov 5, 2021, 9:30 AM
What sized would I need for a tank that’s 60 length 30 width
Question by: Miles Carkhuff on Sep 8, 2020, 11:46 PM
Hey there,
Thank you for reaching out to us! You would want the 5' kit.

https://www.bulkreefsupply.com/diy-aquarium-screen-top-kits-1-4-netting.html

Please let me know if you need anything further and take care!
Answer by: Matt Lucero on Sep 9, 2020, 1:53 PM
What is the difference between the normal and rimless packages?

I only need the 2ft package, but have a rimless tank. Is my only option to buy the 5ft rimless?
Question by: Colin Levy on Oct 30, 2017, 9:52 AM
Hey there,

In most cases rimmed tanks include a center brace, in which case we include framing to make two separate screens (one for each side.). For rimless tanks, we include longer sections of framing to span the entire length. If you only need a two foot length screen, you can just order the 2ft kit SKU: 220130
Answer by: Randy on Nov 25, 2017, 10:42 AM
What size is the fame ? If it's prime line it's either 5/16" or 7/16" as I'm considering modifying my cover to go around the return lines and need to get 8 corners .
Question by: adam tucker on Oct 23, 2017, 1:06 PM
Hi Adam, great question!

Our frame rails measure 3/4" wide and 5/16" thick. I cannot comment on whether or not our corners will work with your existing frame but they can be modified with a utility knife if they are a close fit.
Answer by: Nick Manderfeld on Nov 10, 2017, 10:53 AM
Hi,

Wondering what size to get for an SC Aquarium starfire 50gallon?? I was thinking of the 2feet??
Question by: Kai on Jun 5, 2017, 1:50 PM
That's difficult to say without knowing the exact footprint of your aquarium, but an easy tip is that the kit includes 2 frame lengths for the short side of the tank, and 2 frame lengths for the long side. Just ensure that the kit you select has pieces that are long enough for both the short side of your tank, as well as the long side, and you'll be fine!

Have a great day!
Answer by: Zack on Jun 12, 2017, 1:47 PM
What's is the best size to buy for a jbj 45 rimless tank?
Question by: Alton on May 29, 2017, 4:46 PM
Based on the dimensions I was able to find on that tank, it looks like both sides are under 24". Our 2ft DIY kit includes 4 2ft lengths which can be cut to size, so this should be perfect!

Regards
Answer by: Zack on Jun 7, 2017, 1:32 PM
What screen kit should I get for a 120 gal 4'+2' ? it is NOT rimless. Thanks
Question by: Steve on Jan 26, 2017, 12:44 PM
Great question! We have kits for rimmed tanks also! The 4' Rimmed kits can make two 3' x 3' net tops, so if you have a center brace you can make two separate screens for each side! :-)

https://www.bulkreefsupply.com/diy-aquarium-screen-top-kits-for-rimmed-tanks-1-4-netting.html
Answer by: Randy on Jan 29, 2017, 6:51 PM
I'm dumb, what about an unconventional tank size like a 300DD (6x3) Has 2 cross bracers. So I would be ordering like 3 of the "3 foot" tank sections and then swap width length? (So 3 foot front to back, and 2 feet width which should put the edges over the braces?
Question by: Nick on Apr 10, 2016, 10:10 PM
Great question!
With 3 sections over your tank you will want 3 of the 3 foot kits. You can cut with a hack saw the frames down to length to work on your tank! Feel free to let us know if you have any further questions!
Answer by: Connor on Apr 14, 2016, 10:36 AM
Hi, would this kit work for a corner bow front? front corners to back tip of corner are both 32 1/2 " ansentire front bow from left to right 36". i dont know how to check the brand of tank. i bought it used as just tank and stand! also!!! will it work with a basking light on it as i am using it as a water dragon set up as i find all my sw supplies. if this kit works, please provide me a direct link to which exactly i need! thanks!
Question by: ashley on Mar 12, 2016, 3:01 PM
Great question!
Unfortunately the screen top kits are not well suited for corner tanks or bow fronts. The frame is standard window frame and does not bend along with bow of the tank. in addition the screen is not designed to hold elements and a hot basking light would have the potential to melt through the top. Feel free to let us know if you have any further questions!
Answer by: Connor on Mar 14, 2016, 4:02 PM
I have a 48" x 12.5" tank, but it's divided in the middle by a support. Would I need to buy 2 2' kits, or will a 4' kit work with the frame supplied?
Question by: Mike on Feb 8, 2016, 8:05 PM
Great question!
We currently have the 1/8" screen top kit available in rimless (one top kits) and rimmed (which make 2 tops) You will want the 4" rimmed option. I have included the link below!

4 Ft DIY 1/8" Screen Top Netting Kit - Rimmed Tanks
SKU: 220205
https://www.bulkreefsupply.com/diy-aquarium-screen-top-kits-1-8-netting.html
Answer by: Connor on Feb 10, 2016, 12:55 PM
I just bought this kit. Any suggestions for notching the frame (or ???) so that it can lay flat and have a notch for the power cords leaving the tank?
Question by: Lori Fick on Feb 5, 2016, 2:42 PM
Great question!
We typically will shape the frame to be a little smaller to allow for cords to leave the back, To notch you may be able to with a hack saw or metal sheers. Feel free to let us know if you have any further questions!
Answer by: Connor on Mar 2, 2016, 12:31 PM
Would this netting be ok, under Metal halide lighting? Because of the Heat?
Question by: Garry on Feb 4, 2016, 2:08 PM
Great question!
The netting will work great under metal halide, We currently have several tanks with this netting under MH. Feel free to let us know if you have any further questions!
Answer by: Connor on Feb 4, 2016, 2:14 PM
Does this work for a rimless tank like the reefer 250
Question by: Nick on Feb 4, 2016, 12:45 PM
Great question!
Yes, this can work with rimless tanks. A popular option is the aquarium lid clips in the link below!
https://www.bulkreefsupply.com/auqa-gadget-screen-top-suspension-clips-innovative-marine.html
Answer by: Connor on Feb 4, 2016, 3:07 PM
What thickness are the frame sections? 1/4"? 3/8"
Question by: Emmanuel on Jan 28, 2016, 10:32 AM
Great question!
This is 5/16" thick from top to bottom. Feel free to let us know if you have any further questions!
Answer by: Connor on Feb 4, 2016, 5:28 PM
I have a plastic rim tank and the top sits down in flush, this makes it hard to get a hold of and lift up for feeding and tank cleaning. Do you have any kind of handle to attach to the frame?
Question by: Bruce Hanson on Jan 24, 2016, 10:15 AM
Great question!
We do not currently have a handle solution available. However this may be a DIY project with Super glue and small segment of plastic or acrylic. Feel free to let us know if you have any further questions!
Answer by: Connor on Feb 3, 2016, 11:37 AM
Can this kit be purchased with 1/2" screen top netting?
Question by: Donald on Jul 5, 2014, 6:17 AM
Hi Donald,
You can't get this exact kit with 1/2" netting but we do sell an identical product that is 1/2" instead of 1/4" which can be found at the link below:
https://www.bulkreefsupply.com/diy-aquarium-screen-top-kits-1-2-netting-1.html
Answer by: Bulk Reef Supply on Jul 5, 2014, 6:17 AM
How does this stay suspended if it is cut to fit the inside dimensions of the tank?
Question by: John on May 12, 2014, 12:20 PM
Hi John,
On most tanks you would cut it long enough that it fits on the inside lip of the rim. If you have a rimless tank and you want to cut it smaller then the inside dimension then you would need some sort of bracket or clip.
Answer by: Bulk Reef Supply on May 12, 2014, 12:20 PM
what material are the frames made out of. Could I cut 1/2 or 3/4" off segments?
Question by: debby on Apr 30, 2014, 4:10 AM
Hi Debby,
They are made out of aluminum. In almost every tank situation your going to have to trim the frames to size. A hacksaw works the best for most folks.
Answer by: Bulk Reef Supply on Apr 30, 2014, 4:10 AM
I just received this kit and put it together. When I did, my measurements were a little off and the screen top does not fit flush on my aquarium. Is there an easy way to take it apart and cut what I need to to make it fit? Or do I have to buy some more materials and start over from scratch? Thanks.
Question by: David on Apr 24, 2014, 1:50 AM
Hi David,
You can just pull the spline out pretty easily. Once the spline is out the netting should fall right out. From there the frame can just be pulled out of the corners and trimmed if needed.
Answer by: Bulk Reef Supply on Apr 24, 2014, 1:50 AM
I have a t5 fixture that sits on the frame of the tank on the sides. Will these system be compatible with it? Can I build this screen top so that it sits on the inside of the lip of the tanks rim?

Thanks,
Matt
Question by: Matt on Apr 2, 2014, 6:34 AM
Hey Matt,
Most folks make the frame small enough to fit on the inside lip of the frame, so unless the legs on your light fixture protrude a lot on the inside lip, you should be just fine. There strong enough that if the frame was only supported on the front and back lips you usually wouldn't have any issues either.
Answer by: Bulk Reef Supply on Apr 2, 2014, 6:34 AM
Hi, is the frame metal or plastic? Thanks.
Question by: Eric on Feb 18, 2014, 6:20 AM
Hi Eric,
The frame itself is made from aluminum.
Answer by: Bulk Reef Supply on Feb 18, 2014, 6:20 AM
Just wanted to make sure everything is correct before I ordered the kit. My tank is 18 x 18 x 18, so that means I should order the 2 feet kit? Thank you
Question by: Philip on Jan 15, 2014, 6:21 PM
-3
Hey Phillip,
You are correct! You cut them down to size so you just want to make sure they are atleast as long as the sides of your tank.
Answer by: Bulk Reef Supply on Jan 15, 2014, 6:21 PM
What is the Frame con structured out of? Is it metal or plastic? Is it safe to have touching the water?
Question by: Wade on Jan 10, 2014, 3:44 PM
-1
Hi Wade,
The frame is made from aluminum. It won't rust and water splashing on it/salt spray isn't an issue though I wouldn't suggest actually submerging it.
Answer by: Bulk Reef Supply on Jan 10, 2014, 3:44 PM
i have a jbj nano 28 that has a rounded front. is there a way to make this screen with a rounded front.
Question by: theo on Oct 31, 2013, 4:08 PM
Hi Theo,
Unfortunately the frame doesn't bend well. What most folks do is make a square/rectangle shaped screen to cover what they can as its better then nothing.
Answer by: Bulk Reef Supply on Oct 31, 2013, 4:08 PM
Is the 1/4" spacing of the grid?

How will it affect reef light?

What's the best way to cut the framing pieces to the fit my tank?
Question by: Scott on Oct 28, 2013, 8:07 AM
-2
Hi Scott,
Correct, its the grid spacing on the netting. It has a very minimal effect on the amount of light in the tank. The easiest way to cut the framing is with a simple hacksaw.
Answer by: Bulk Reef Supply on Oct 28, 2013, 8:07 AM
I have bought just the screen in the past. I use it to make custom lids for people with acrylic. Is the mesh on its own still available?
Question by: Jonathan on Oct 22, 2013, 2:40 PM
-3
Hey Jonathan,
I think this is what your looking for:
https://www.bulkreefsupply.com/clear-netting.html
Answer by: Bulk Reef Supply on Oct 22, 2013, 2:40 PM
What is the best way to cut this? If my tank is a 90 gallon (48.5 inches by 18.5 inches), the 4 foot section covers the length, but too much on the width. Suggestions?
Question by: Matt on Oct 21, 2013, 5:52 PM
-6
Hey Matt,
A hacksaw works just fine for the screen frame. The netting itself is soft enough to easily be cut by a razor blade.
Answer by: Bulk Reef Supply on Oct 21, 2013, 5:52 PM
This may be a stupid question but I have a 55 gallon tank. The dimensions are 48 x 13 x 20. I just need to order the 4 foot kit correct?
Question by: Mike on Sep 12, 2013, 7:35 AM
-2
Hey Mike,
You got it. The 4ft kit comes with frame and netting to cover up to a 4ft x 3ft area.
Answer by: Bulk Reef Supply on Sep 12, 2013, 7:35 AM
-1