Why does BRS recommend this?
Those who have used Cepex ball valves know they are worth every penny. Most hardware stores carry cheap ball valves that over time get hard to turn and can break pretty easily. Cepex ball valves will last a lifetime with super smoother operation. We are always recommending the use of unions on plumbing as well. Unions make everything from plumbing to maintenance easier. Having a union on each side of the ball valve allows for easy removal of hardware, or isolation of equipment for service.
Cepex Ball Valves operate with smooth precision and last forever.
- Comes with slip AND thread fittings
- Smooth long-term operation
- Key for tightening seal
- Easy breakdown makes cleaning a breeze
- More professional look than white Schedule 40 PVC
The golden rule of plumbing is that every job takes three trips to the store. While this can be frustrating locally it can be much worse when shopping online. Being short a fitting or two can delay a plumbing project for days. Here are some quick tips to avoid this.
- Plan your plumbing on paper
- Don't skimp on unions. Unions allow for easy breakdown and maintenance as well as remove the need for precise elbow placement. Use them as often as possible.
- When in doubt order extra. We happily accept returns for a full refund (less shipping) on all unused fittings as part of our 365 day return policy. A few extra bucks in return shipping is less frustrating than a project delay.
Do you already have a few Cepex Ball Valves and need new slip connectors? Click Here
| SKU | brs-cepex-ball-valce |
|---|---|
| Aquarium Type | Saltwater, Freshwater |
Write Your Own Review
Product Questions
Will the schedule 80 male threaded barb work with the included threaded connection?
or
What kind of threads is included with this?
or
What kind of threads is included with this?
Question by: Khoi Tran on Dec 15, 2021, 5:26 PM
Yes, A schedule 80 male threaded barb will work with the threaded connector included with the valve as long as the barb is the same nominal size as the ball valve. The threads are NPT.
Answer by: William Glenn (BRS Staff) on Dec 16, 2021, 2:05 PM
I have 3 1/2” valves running a manifold this set up has been running for a little over a year and I have already replaced all 3 valves once because they were leaking through the shaft of the handle. At the time you didn’t have the replacement gasket kit in stock so I just got new ones. A few months later they are all leaking again. I have several 3/4” and 1 1/2” that are great still dry as a bone. Am I missing something on the 1/2”? Would a gate valve be a better option in 1/2”? Thanks kevin
Question by: Kevin Potter on Aug 4, 2019, 10:19 AM
Hey there!
A gate valve probably wouldn't help much more than a ball valve, in fact I prefer the ball valve because the control does not need to be as precise. If you are experiencing a leak in your valves please contact our customer support for warranty support.
Take care!
A gate valve probably wouldn't help much more than a ball valve, in fact I prefer the ball valve because the control does not need to be as precise. If you are experiencing a leak in your valves please contact our customer support for warranty support.
Take care!
Answer by: Thomas Billington on Aug 6, 2019, 2:00 PM
What is the length of the 1/2” valve?
Question by: chris ethridge on Feb 5, 2018, 10:38 PM
Hey there,
This ball valve is 4.5" in length.
This ball valve is 4.5" in length.
Answer by: Tyler Schafer on Feb 11, 2018, 2:36 PM
Do you guys sell the union nut for these ball valves?
Question by: Robert on Sep 14, 2017, 8:29 PM
Hey there,
While we don't sell the threaded nut portion of the valve, if you're looking to re-use a cepex ball valve, we do have replacement union ends, which can be purchased at the link below.
https://www.bulkreefsupply.com/replacement-ball-valve-slip-connectors-cepex.html
Happy reefing!
While we don't sell the threaded nut portion of the valve, if you're looking to re-use a cepex ball valve, we do have replacement union ends, which can be purchased at the link below.
https://www.bulkreefsupply.com/replacement-ball-valve-slip-connectors-cepex.html
Happy reefing!
Answer by: Zack on Sep 15, 2017, 3:57 PM
What are the dimensions of the 1" valve?
Question by: nik buhl on May 16, 2017, 12:33 PM
Hey there,
The Cepex Ball valve will be approximately 5"L x 2.75"W x 4.25"T
Have a great day!
The Cepex Ball valve will be approximately 5"L x 2.75"W x 4.25"T
Have a great day!
Answer by: Zack on May 18, 2017, 1:51 PM
Hey do this product come with the union?
Question by: steven soccer luo on Feb 24, 2017, 8:02 PM
Hey there,
The unions are built into the cepex ball valves. They provide collars for both slip and threaded applications.
Have a great day!
The unions are built into the cepex ball valves. They provide collars for both slip and threaded applications.
Have a great day!
Answer by: Zack on Feb 27, 2017, 4:12 PM
How large are the 1" valves?
Question by: Phillip on Dec 30, 2016, 3:39 PM
Great question! The 1" Cepex ball valve is 4 7/8" inches long from end to end. :-)
Answer by: Randy on Jan 9, 2017, 11:46 AM
Do you sell replacement slip fittings? I'd like to re-use my valves on a new build.
Question by: Derrick on Nov 8, 2016, 12:27 PM
Hey there, thanks for reaching out to us! We currently do not sell the replacement sleeves for these ball valves. Also, the Sch80 True Unions will not fit with the Cepex valve. You would have to purchase a new valve for those parts. :-)
Answer by: Randy on Nov 8, 2016, 12:48 PM
Can these valves be connected directly to an ABS bulkhead?
Question by: Jose Urban on Jul 4, 2016, 3:08 AM
No, The Ball valve and Bulkhead are both fitting with accept a piece of PVC pipe to be threaded or glued in. Feel free to let us know if you have any further questions!
Answer by: Connor on Jul 6, 2016, 3:11 PM
Hi, can i use regular primer and cement to glue the cepex ball valve to regular white PVC?
Question by: Arturo on Apr 21, 2016, 12:35 PM
Great question!
You can use regular primer and cement with the ball valve and schedule 40 PVC. Feel free to let us know if you have any further questions!
You can use regular primer and cement with the ball valve and schedule 40 PVC. Feel free to let us know if you have any further questions!
Answer by: Connor on Apr 26, 2016, 3:18 PM
Where’s it made?
Question by: Ed on Apr 4, 2016, 10:27 AM
Great question!
These have been manufactured by Cepex in Spain. Feel free to let us know if you have any further questions!
These have been manufactured by Cepex in Spain. Feel free to let us know if you have any further questions!
Answer by: Connor on Apr 8, 2016, 10:09 AM
For one inch pvc pipe do I get a one Inch ball value.
Question by: Jimmy on Feb 23, 2016, 8:51 PM
Correct!
The 1" PVC pipe will slip into the Ball valve 1" fitting. Feel free to let us know if you have any further questions!
The 1" PVC pipe will slip into the Ball valve 1" fitting. Feel free to let us know if you have any further questions!
Answer by: Connor on Feb 24, 2016, 3:33 PM
Can you please tell me the length of the 1" valve, from end to end? Need to make sure there's room to add one of these before building my stand.
Question by: Shannon on Aug 15, 2014, 6:42 AM
Hi Shannon,
The 1" Cepex ball valve is 4 7/8" inches long from end to end.
Hope it fits for you!
Have a great day :)
The 1" Cepex ball valve is 4 7/8" inches long from end to end.
Hope it fits for you!
Have a great day :)
Answer by: Bulk Reef Supply on Aug 15, 2014, 6:42 AM
I am setting up a 240 gallon reef tank it's 8 feet long with an overflow on each end 3/4 supply and 1 inch return I wanted to use these ball valves but wasn't sure if they can work with schedule 40 or if I have to plumb the whole setup in schedule 80? Also I wanted to get the wye check valve in 3/4 in for supply but it looks like it has slip fittings how can I install the check valve inline with the solid piping?
Question by: Louis on Dec 5, 2013, 5:51 PM
Hey Louis,
Sch40 and sch80 have the same size fittings, etc and are interchangeable so no worries there. The slip fittings on the check valve are the same diameter as the pipe, so they can be connected with unions or really any other fititng that would connect two pieces of pipe.
Sch40 and sch80 have the same size fittings, etc and are interchangeable so no worries there. The slip fittings on the check valve are the same diameter as the pipe, so they can be connected with unions or really any other fititng that would connect two pieces of pipe.
Answer by: Bulk Reef Supply on Dec 5, 2013, 5:51 PM
Can I use the Cepex ball valves with Schedule 40 PVC? My tank is already drilled for the Schedule 40 bulkheads so I'm already stuck with that kind of PVC. Just wanted to be sure before I purchased this for my plumbing.
Question by: Craig on Nov 11, 2013, 9:28 AM
Hi Craig,
Schedule 80 and 40 pvc are compatible. All the plumbing will have the corresponding nominal sizes, so a 1" Sch80 Cepex ball valve for example will fit 1" Sch40 pipe just fine.
Schedule 80 and 40 pvc are compatible. All the plumbing will have the corresponding nominal sizes, so a 1" Sch80 Cepex ball valve for example will fit 1" Sch40 pipe just fine.
Answer by: Bulk Reef Supply on Nov 11, 2013, 9:28 AM
can these valves be used with vinyl tubing.
Question by: phrank on Nov 7, 2013, 7:27 PM
Vinyl tubing cannot be connected directly but you could also pick up some barb fittings to attach to each side of the valve that would then allow you to connect a flexible tubing.
Answer by: Bulk Reef Supply on Nov 7, 2013, 7:27 PM
Login and Registration Form